RCM

The RCM Oil Catch tank kit offers many benefits. On a standard engine oil vapours from the crankcase and cylinder heads are usually recycled back through the air intake system. The downside of this is that the intake hoses, turbo, intercooler and connecting pipe work can all see a build up of oil over a…

This unique RCM Kit has been designed and produced, in order to eliminate the problems encountered when fitting an EJ207 Engine into a vehile which would normally be fitted with an EJ257 Engine. These cams fit directly into the EJ207 VVT heads, and work with the EJ207 Drive By Wire 3 pin cam sensor, with…

RCM Stainless Steel Headers offer increased power and torque with improvel turbo spool. Our exhaust manifolds not only offer significant performance gains across a range of areas but are also manufactured to the highest of standards. Manufactured with slip joints at 2 points, this allows for expansion under temperature changes so as not to place…

RCM Individual coil pack conversion loom. This kit is a direct plug and play conversion wiring loom which allows V5/6 vehicles from 1999-2000 normally fitted with a single coil pack to run 4 x individual coil packs from the 2001+ models for improved ignition performance essential in high power engine builds.

RCM prides itself having OE parts manufacturers as their technical partners. This is never more important than with our range of RCM Power Parts timing belt kits where we are working closely with NTN, NSK, Koyo & Aisin to formulate our range. Sourcing direct with the manufacturers enables us to offer the same high quality…

RCM Titanium Wheel Nut Set (x20) Titanium wheel nuts are 29% stronger and nearly 50% lighter than steel which results in a decreased rotational wheel mass, quicker acceleration and handling benefits in high performance applications. Additionally the lower thermal expansion of titanium results in more consistant tension under heating. Super lightweight in design and engineered…

RCM’s own Fuel Pressure gauge, for use with RCM fuel pressure regulator. Essential when fitting an aftermarket regulator, to ensure adequate fuel pressure is present. If you require the RCM Fuel Pressure Regulator (not included), please see here

The RCM Gen2 Alternator Relocation kit has is designed to enable more space to be created, essential when reversing the intake manifold. This kit is designed to be used with the conventional OEM power steering pump and alternator configuration. This complete kit has a number of enhancements on previous solutions to the problems faced when…

RCM Eccentric Adjustable Idler Dual Bearing Set.

Cotton T-Shirt with the RCM PowerParts Logo on the Front + Back. Available in Black and White, sizes Small, Medium, Large, X-Large, XX-Large & XXX-Large. #lookingcoolholdingyourtool