Workshop Equipment & Consumables

Motul Tech 300 high performance multipurpose grease, suitable for machinery under normal or severe conditions including high temperature, heavy load, humidity and vibration. Operating range from -30C to +150C continuously, up to +200C at peak. Listed for the Subaru Impreza 1992-2000 (GC/GF).

High performance torque/assembly lubricant with a blend of anti-wear additives and high graphite content, intended to help stabilise tension loads during torque procedures on performance engine components. Supplied as a 15g sachet.

WD-40 400ml aerosol lubricant spray. Cleans grease, grime and marks, protects metal surfaces from corrosion, lubricates moving parts, penetrates rusted or seized components and displaces moisture from electrical systems. Listed as a general workshop/service item.

Engine cylinder leakage tester that measures leakage as a percentage by removing only the spark plugs, helping to identify internal engine damage and which cylinder is affected. Indicates whether the fault lies with the valves and valve seats or the piston, bore and rings. A workshop compressor is required to operate this tool.

Plastigauge precision clearance measuring plastic, used to check clearances in plain automotive bearings, including split bearings or where a feeler gauge cannot be used. Measures 0.001-0.007 inches (0.025-0.175mm). Available as a single sleeve of 10 strands or a bulk box of 100 strands.

FibreKing premium microfibre cloths, sold in packs of 36. Made from 85% polyester and 15% polyamide, 325 GSM, sized 40.6 x 40.6cm. Lint-free and machine washable, suitable for use wet or dry on cars, motorcycles and general workshop or home surfaces. Available in six colours.

Time-Sert metric fine thread repair kit for restoring stripped threads in aluminium and other alloys, such as brake calipers, cylinder blocks and gearbox cases. Includes 120 repair inserts covering M5, M6, M8, M10 and M12 sizes. Suitable as a general service item across the Subaru range.