Engine

RCM Powerparts performance camshaft kit for V5-V8 Subaru Impreza WRX models (GC/GF, Bugeye, Blobeye, Hawkeye). Please contact Scooby Upgrades for full specification and kit contents, and to confirm fitment, before ordering.

RCM 13-piece black billet block blanking kit, supplied with new aluminium sealing washers. Includes a stainless steel modine water adaptor, oil pressure switch bung, 2 block sealing bolts, and the RCM billet gudgeon pin cover and oil separator cover, replacing all OE sealing bungs.

A dampened oil pick-up pipe for Subaru EJ25 and twin-scroll applications, supplied pre lock-wired to a new genuine Subaru oil pick-up pipe. Designed to reduce oil starvation during hard cornering and cushion the pipe against sump damage.

A dampened oil pick-up pipe for Subaru Impreza GC8/GF8 models (1992–2000), supplied pre lock-wired to a new genuine Subaru oil pick-up pipe. Designed to reduce oil starvation during hard cornering and cushion the pipe against sump damage.

An oil catch tank kit for right-hand drive Subaru Impreza single-scroll EJ25 and twin-scroll applications. Vents crankcase and cylinder head vapours into a separate tank, with a supplied drain hose returning separated oil to the sump. Please contact Scooby Upgrades to confirm compatibility with your vehicle before ordering.

A Track Attack oil catch tank kit for right-hand drive Subaru Impreza EJ25 and twin-scroll models (2001–2007). Vents crankcase and cylinder head vapours into a separate tank, with a supplied drain hose returning separated oil to the sump.

RCM Powerparts camshaft conversion kit (V9 STI DBW) for fitting an EJ207 engine into a vehicle originally equipped with an EJ257 engine. Compatible with EJ207 VVT cylinder heads and the EJ207 drive-by-wire 3-pin cam sensor. Fits Subaru Impreza 2006-2007 (Hawkeye).

Forged flat-top piston set manufactured by Omega Pistons for the EJ20 engine. Supplied in 92.00mm standard bore plus 92.25mm and 92.50mm oversize. Listed across multiple Subaru EJ20 applications.

RCM fuel pressure gauge designed for use with an RCM fuel pressure regulator (sold separately), for monitoring fuel pressure after fitting an aftermarket regulator. Listed across a wide range of Subaru models; please contact Scooby Upgrades to confirm compatibility before ordering.

Forged piston set manufactured by Omega Pistons for the EJ22G engine used in the Subaru Impreza 22B (March-August 1998, V3-V4). Supplied in 0.25mm and 0.50mm oversize only. Listed for GC/GF-chassis Impreza (1992-2000).